Operation Manual

RIP Configuration
The RIP Per Interface Configuration page allows the user to set the configuration for
each Interface (PVCs, PPP Sessions, USB and LAN).
Interface:
This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and LAN),
for the RIP to be configured.
Enable:
This field allows the user to Enable (Yes) or Disable (No) the Specified interface for
RIP.
Supplier:
This field allows the user to select the Supplier Mode (RIP Transmit).
• Disabled: The supplier transmit is disabled.
• V1 BC: The supplier transmits in RIPv1 Broadcast.
• V2 BC: The supplier transmits in RIPv2 Broadcast.
• V2 MC: The supplier transmits in RIPv2 Multicast.
Listener:
This field allows the user to select the Listener Mode (RIP Receive).
• V1: The listener receives the RIPv1 only.
• V2: The listener receives the RIPv2 only.
• V1+V2: This listener receives the both RIPv1 and RIPv2.
Supplier and Listener are based on section 4.1 “Compatibility Switch” in RFC 1723.