Operation Manual

ADSL Configuration
The ADSL Configuration page allows users to set the configuration for ADSL protocols.
Trellis:
This field allows the user to enable or disable the Trellis Code. By default, it is always
enabled.
Handshake Protocol:
This field allows the user to select the ADSL handshake protocol.
Wiring Selection:
This field allows the user to enter the wiring selection for the RJ-11. Tip/Rip is the
default for the board without the inner/outer pair relay.
Bit Swapping:
This field allows the user to enable or disable the upstream bit swapping.
Note:
Click the Submit button to save the settings in temporary memory. If you make
changes the configurations
.