Operation Manual

User mode:
Under the Single User mode, the DHCP server only allocates one IP address to local
PC. Under the Multiple User mode, the DHCP server allocates the IP addresses
specified by the DHCP address pool.
Ethernet Mode Setting:
Click ‘Ethernet Mode Settings’ in the LAN Configuration page
The Ethernet Mode Configuration page allows the user to set the LAN port into Auto
Sense, 100 Mbps Full Duplex, 100 Mbps Half Duplex, 10 Mbps Full Duplex or 10 Mbps
Half Duplex.
Note:
Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.