Operation Manual

LAN
The LAN configuration page allows you to set the configuration for the LAN port.
LAN Configuration
LAN IP Address & Subnet Mask:
The default is 10.0.0.2 and 255.0.0.0 you can change it to another private IP address,
such as 211.22.10.191 and 255.255.255.0. For most configurations it is recommended
to leave it as default.
DHCP Server:
System Allocated. The DHCP address pool is based on LAN port IP address plus 12 IP
address. For example, the LAN IP address is 10.0.0.2; the DHCP address pool is at the
range of 10.0.0.3 to 10.0.0.14.
User Defined:
The DHCP address pool is at the range of User Defined Start Address and User Defined
End Address. The maximum pool size can be 253 IP address:255 total IP address-1
broadcast address-1 LAN port IP address.
DHCP Gateway Selection:
The default setting for the DHCP Gateway Selection is “Automatic”. The user can
select the “User Defined” to specify “User Defined Gateway Address”. The DHCP
server will issue the “ User Defined Gateway Address” to the LAN DHCP client.
Lease time:
The lease time is the amount of time of a network user will be allowed to connect
with DHCP server. If all fields are 0, the allocated IP address will be effective forever.