Operation Manual

ENGLISH
- 8 -
4.2 Configuring your ADSL Router
1. Open your web browser and type in the address field: http://192.168.1.254
This IP address is the default IP address of the ADSL Router. Press ‘Enter’.
2. An ‘Enter Network Password’ dialog box appears. Just click ‘OK’. No
‘Username’ and ‘Password’ is not set by default. You may change this later in
the ADSL router’s configuration.
3. Click WAN -> ISP in the left pane and select one of the connection protocols.
Depending on your ISP.
You can choose the following protocols:
- PPoE
- PP0A
- RFC1483
- IPoA
- PPTP-to-PPPoA Relaying
4. Please check your telecom/ ISP provider information for your VPI, VCI and
Protocol settings.