User manual

ENGLISH

3.2 Three-Port ADSL Filter (Used in most ADSL Situations)

Another type of filter is installed at the same point where the Router connects to the

telephone line. Only a single filter is required. The connection ports are typically labelled as

shown below:

 Line - This port connects to the wall jack.

 ADSL – This port connects to the Router.

 Phone – This port connects to a telephone or other telephone device.

The diagram below illustrates the proper use of this type of filter. Make sure the lines are

properly connected. If you are unable to hear a dial tone with the telephone, check the

connections to make sure the cables are securely attached and connected to the correct

port.

ADSL Device

3-port Filter

CADSLR4(B)

Phone

Jack

Line Splitter

Phone