Installation guide

39
Web Access Control
The Web Access Control page allows you to access the RG remotely via the web from
the WAN side.
Enable: Enables/disables the remote web access feature.
Choose a Connection: Select the WAN connect over which the remote web access
feature is enabled.
Remote Host IP: Enter the IP address of the remote host.
Remote Netmask: Enter the netmask of the remote host.
Redirect Port: You can enter a port number in this field that is different from the
well-known IP port number 80. The port number that you enter will be viewed
externally and mapped to port 80 internally in the RG.
Click Apply to complete the setup. Click Save All to save the changes.