Installation guide

3
ADSL 2/2+ 4 Port Router
Line Connection
RJ-11(2 wires), RJ-45 (4 port)
ADSL Features
DMT modulation and demodulation
Tone detection for low power mode
ATM SAR performed in software driver
ITU 992.1 (G.dmt) Annex A, B,
ITU 992.2 (G.lite)
ITU 992.3 ADSL2 (G.dmt.bis)
ITU 992.5 ADSL2+
ANSI T1.413 Issue 2
Full-rate adaptive
modem
Maximum downstream rate of 24 Mbps (ADSL2+)
Maximum upstream rate of 1 Mbps
G.lite adaptive modem
Maximum downstream rate of 1.5 Mbps
Maximum upstream rate of 512 Kbps
WAN Mode Support
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
LAN Mode Support
Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 1577) and PPP over
Ethernet (RFC 2516)
Bridge Mode Support
Ethernet to ADSL self-learning Transparent Bridging
(IEEE 802.1D)
Supports up to 128 MAC learning addresses
Router Mode Support
IP routing-RIPv2 (backward compatible with RIPv1)
Static routing
DHCP (Dynamic Host Configuration Protocol) Server
and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
Ethernet Features
Four RJ-45 connectors for 10/100 Mbps Ethernet LAN
connection,
DMZ function can be set up between them
Complies with IEEE 802.3u specification
Supports IEEE 802.3x Flow control in Full Duplex mode
Certification
CE,LVD
OS
WIN 98SE ; WIN 2000；WIN ME；WIN XP
System Requirement
PII-266 + 32M RAM
Power
External AC Power
Power ON/OFF switch (option)
Input: 90~120V or 200~240V, 50/60Hz
Output: 12VAC/800mA
LED Indication
Power, LAN1, LAN2, LAN3, LAN4, ADSL Link/Act
PCB SIZE
134mm×96.5mm
Software Upgrade
Upgrade by Ethernet Port