Installation guide

DMZ

This DMZ Settings page allows you Enable or Disable this function. This function is

disabled by default. By enabling DMZ, you add an extra layer of security protection for

hosts behind the firewall.

Enable DMZ: Enables/disables the Demilitarized Zone feature. This field is

unchecked (disabled) by default.

Select your WAN Connection: Select the WAN connection on which the DMZ

feature is applied.

Select LAN Group: Select the LAN Group on which the DMZ feature is applied.

Select a LAN IP Address: Select the LAN IP address you are going to use as the

DMZ host. This host is exposed to the Internet. Be aware that this feature may

expose your local network to security risks.

Click Apply to complete the setup. Click Save All to save the changes.

Enable DMZ

Function.