Installation guide

28
SNTP
The Router keeps time by connecting to a Simple Network Time Protocol (SNTP)
server. This allows the Router to synchronize the system clock to the global Internet.
The synchronized clock in the Router is used to record the security log and control
client filtering.
Primary SNTP Server: Enter the SNTP Server address. Default is 0.0.0.0.
Secondary SNTP Server: Enter the SNTP Server address. Default is 0.0.0.0.
Tertiary SNTP Server: Enter the SNTP Server address. Default is 0.0.0.0.
Timeout: Timeout (secs) for response to SNTP request.
Polling Interval: Time interval (min) between two successful SNTP requests.
Retry Count: Max. no of failed sntp requests to a server.
Time Zone: Time zone of the location.
Day Light: Daylight savings feature enabled (1) or disabled (0). Default disabled.
Click Apply to complete the setup. Click Save All to save the changes.