Operation Manual

ENGLISH
- 40 -
Protocol: There are two ways - RFC1483 and PPTP-to-PPPoA Relaying - for the device to have a public IP address.
You have to check with your ISP about which way is adopted.
VPI/VCI: Consult the telephone company to get the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers.
The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.
Encapsulation Method: Be sure to use the encapsulation method (LLC/SNAP or VC MUX) required by your ISP.
3.5.3 System
Password
In factory setting, there is no password protection when user accesses the ADSL Router. It is recommended that you change
the default password <BLANK> to ensure that someone cannot adjust your settings without your permission. <BLANK>
means there is no password. Every time you change your password, please record the password and keep it at a safe place.
Please note that the maximum input for password is 8 alphanumeric characters long. Since it is case sensitive, be sure that
you remember whether a letter is in upper or lower case and make sure that your Caps Lock is off.