Operation Manual

ENGLISH
- 20 -
Configure this WAN interface with a specific IP address. This IP address should be given from ISP directly.
NAT: The NAT feature allows multiple users to access Internet through a single IP account, sharing the single IP address
from ISP. If users in the LAN site have public IP addresses and can access Internet directly, the NAT function can be
disabled.
IP Address: Enter the information provided by your ISP.
Subnet Mask: Enter the information provided by your ISP.
Gateway Address: Enter the information provided by your ISP.
IPoA
Configure this WAN interface with a specific IP address. This IP address should be given from ISP directly.
NAT: The NAT feature allows multiple users to access Internet through a single IP account, sharing the single IP address
from ISP. If users in the LAN site have public IP addresses and can access Internet directly, the NAT function can be
disabled.
IP Address: Enter the information provided by your ISP.
Subnet Mask: Enter the information provided by your ISP.
Gateway Address: Enter the information provided by your ISP.
PPTP-to-PPPoA Relaying
It can be used to connect and establish a PPTP tunnel between PPTP client on LAN and router. The router will convert and
map the PPTP packet from/to PPP packet. Router establishes a PPPoA connection with ISP.