Operation Manual

ENGLISH
- 19 -
PPPoA
NAT: The NAT feature allows multiple users to access Internet through a single IP account, sharing the single IP address
from ISP. If users in the LAN site have public IP addresses and can access Internet directly, the NAT function can be
disabled.
Username: Enter the username provided by your ISP. Maximum input is 63 alphanumeric characters (case sensitive).
Password: Enter the password provided by your ISP. Maximum input is 63 alphanumeric characters (case sensitive).
Authentication Protocol: Default at “AUTO”.
¤ Always On: Check this radio button if you want to establish a PPPoE session when starting up. It will also automatically
re-establish the PPPoE session when disconnected by ISP.
¤ Connect on Demand: Check this radio button if you want to establish a PPPoE session only when there is a packet
requesting for going out to the Internet.
Auto-disconnect if idle for more than  minutes: Auto-disconnect the ADSL Router when there is no activity on the line
for a predetermined period of time. You can input any number from 0 to 999. The default value is 5 minutes.
RFC1483