User guide
ENGLISH
30
Movie Setup page
Repeat : Set Repeat mode.
One / Off / All / Shuffle
Main Page : Return to the Setup Menu
Slideshow Setup page
Folder Repeat : Repeat the contents of a folder.
On / Off / Shuffle
Interval Time : Set the interval time of the
slideshow.
Transition : Set a standard transition for the
slideshow.
Main Page : Return to the Setup Menu
Preferences Setup page
TV Display : Set your TV Display size.
Tv Type : Set your TV Type: PAL / NTSC.
Video Output : Select the correct video output
for the connected TV / Monitor.
OSD Language : Set the OSD Language of the
Media Player.
Configuration : Reset the Configuration to the
factory default settings.
Main Page : Return to the Setup Menu
7. Tips & Troubleshooting
Use the tips below for troubleshooting when your CMED2PRO is not working properly:
The Power LED doesn’t light up
x The power supply is not connected to the CMED2PRO. Reconnect the power supply to the
CMED2PRO.
There is no activity on the display.
x The CMED2PRO is in standby state. Press the button on the remote control to activate it.
x The Wrong input source on your TV is selected. Change the input source.
x The Wrong video system selected. Press the OUTPUT button on your remote control to switch video
system.
x The Video cable is not connected properly. Check if the Video Cable is connected correctly.