User`s manual

7
2-2-2. Windows Vista IP address setup:
A. Click ‘Start’ button (it should be located at
lower-left corner of your computer), then
click control panel. Click View Network
Status and Tasks, then click Manage
Network Connections..Right-click Local
Area Netwrok, then select ‘Properties’.
Local Area Connection Properties window
will appear, select ‘Internet Protocol Version
4 (TCP / IPv4), and then click ‘Properties’.
B. Select ‘Use the following IP address’, then
input the following settings in respective
field:
IP address:
192.168.2.2
Subnet Mask:
255.255.255.0
Click ‘OK’ when finished.