User`s manual

43
3-3. System Reset
When you think the access point is not working properly, you can use this function to restart the access point;
this may help and solve the problem.
This function is useful when the access point is far from you or unreachable. However, if the access point is not
responding, you may have to switch it off by unplug the power plug and plug it back again after 10 seconds.
To reset your access point, please click ‘Reset’ on the left, and the following message will be displayed:
Please click ‘Apply’, and a popup message will ask you again, to make sure you really want to reset the access
point:
Click ‘OK’ to reset the access point, or click ‘Cancel’ to abort. Please remember all connections between
wireless client and this access point will be disconnected.