User`s manual

41
Chapter III: Advanced Configuration
3-1. Configuration Backup and Restore
You can backup all configurations of this access point to a file, so you can make several copied of access point
configuration for security reason.
To backup or restore access point configuration, please follow the following instructions:
Please click ‘Configuration Tool’ on the left of web management interface, and the following message will be
displayed on your web browser:
Here are descriptions of every buttons:
Backup Settings Press ‘Save...’ button, and you’ll be prompted to download the configuration as
a file, default filename is ‘config.bin’, you can save it as another filename for
different versions, and keep it in a safe place.
Restore Settings Press ‘Browse…’ to pick a previously-saved configuration file from your
computer, and then click ‘Upload’ to transfer the configuration file to access
point. After the configuration is uploaded, the access point’s configuration will
be replaced by the file you just uploaded.
Restore to Factory Default Click this button to remove all settings you made, and restore the configuration
of this access point back to factory default settings.