User`s manual

39
2-10-1. Change Password
You can change the password used to enter the web configuration menu of this wireless access point.
Please input current password in ‘Current Password’ field, then input new password in both ‘New Password’
and ‘Re-Enter Password’ field. After you finish, please go to the bottom of this page and click ‘Apply’, and the
following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.
2-10-2. IP Address of the Wireless Access Point
You can change the IP address of this wireless access point, so it can become a part of your local network. Please
remember this address or you will not be able to connect the configuration menu of this wireless access point.
Default IP address is: 192.168.0.2 / Subnet Mask 255.255.255.0, you can press and hold ‘Reset/WPS’ button
over 10 seconds to change the IP address back to default value if you forget the IP address you set.
To change IP address, input IP address and Subnet Mask in corresponding field, and you can input the IP address
of gateway in ‘Gateway Address’ field, if you need to manage this wireless access point from other network
(like Internet).
If you want to activate the DHCP server function of this wireless access point, please select ‘Enabled’ in ‘DHCP
Server’ option, and see next Section for detailed instructions; if you don’t want to use DHCP server function of
this wireless access point, or there’s another DHCP server on the network this access point connects to, please
select ‘Disable’.
After you finish, please go to the bottom of this page and click ‘Apply’, and the following message will be
displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.