User`s manual

35
Here are descriptions of every setup item:
Enable Radius Server Check this box to enable internal radius server function.
User Profile You can add or delete radius user here. Please input username, password, re-type
password in corresponding field, and click ‘Add’ button to add the user to radius
server database. You can click ‘Reset’ to clear the text you typed in above three
fields.
All current radius users will be listed here. If you want to delete one or more users,
check ‘Select’ box of that user, and click ‘Delete Selected’ button; you can click
‘Delete All’ button to delete all users in radius server database. You can also click
‘Reset’ button to uncheck all ‘Select’ boxes.
Authentication Client You can add allowed radius client IP address here. Please input client IP, secret key,
re-type secret key in corresponding field, and click ‘Add’ button to add the IP
address to radius server database. You can click ‘Reset’ to clear the text you typed
in above three fields.
All current IP addresses will be listed here. If you want to delete one or more
addresses, check ‘Select’ box of that address, and click ‘Delete Selected’ button;
you can click ‘Delete All’ button to delete all addresses in radius server database.
You can also click ‘Reset’ button to uncheck all ‘Select’ boxes.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.