User`s manual

33
2-7-5. 802.1x Authentication
You can enable 802.1x user identification (based on RADIUS user authentication server) by checking ‘Enable
802.1x Authentication’ box when you select ‘Disable’ or ‘WEP’ as encryption type, and the following message
will be displayed:
Here are descriptions of every setup item:
Select SSID Choose the SSID you wish to configure.
Use internal MD5/PEAP RADIUS Server Uses built-in RADIUS Server (refer to next Section) instead of
external RADIUS server. If you check this box, the value of internal
RADIUS server fields will be ignored.
Enable 802.1x Authentication Enable or disable the use of 802.1x user authentication.
RADIUS Server IP address Please input the IP address of RADIUS authentication server here.
RADIUS Server Port Please input the port number of RADIUS authentication server here.
Default value is 1812.
RADIUS Server Password Please input the password of RADIUS authentication server here.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.