User`s manual

32
2-7-4. WPA RADIUS
WPA Radius is the combination of WPA encryption method and RADIUS user authentication. If you have a RADIUS
authentication server, you can check the identify of every wireless client by user database.
When you select ‘WPA RADIUS’ as encryption type, the following messages will be displayed:
Here are descriptions of every setup item:
WPA Unicast Cipher Suite You can select WPA encryption type here. AES is safer than TKIP, but
not every wireless client supports it. Please refer to the
specification of your wireless client to decide which encryption type
you should use.
Use internal MD5/PEAP RADIUS Server Uses built-in RADIUS Server (refer to Section 2-8) instead of external
RADIUS server. If you check this box, the value in following three
fields will be ignored.
RADIUS Server IP address Please input the IP address of RADIUS authentication server here.
RADIUS Server Port Please input the port number of RADIUS authentication server here.
Default value is 1812.
RADIUS Server Password Please input the password of RADIUS authentication server here.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.