User`s manual

25
Channel Width Select wireless channel width (bandwidth taken by wireless signals of this access
point). It’s suggested to select ‘Auto 20/40MHz’. Do not change to ’20 MHz’ unless
you know what it is.
Preamble Type Set the type of preamble of wireless radio, Do not modify default value if you don’t
know what it is, default setting is ‘Short Preamble’.
Broadcast ESSID Decide if the wireless access point will broadcast its own ESSID or not. You can hide
the ESSID of your wireless access point (set the option to ‘Disable’), so only people
those who know the ESSID of your wireless access point can get connected.
WMM WMM (Wi-Fi Multimedia) technology, which can improve the performance of certain
network applications, like audio/video streaming, network telephony (VoIP), and
others. When you enable WMM function, the access point will define the priority of
different kinds of data, to give higher priority to applications which require instant
responding. Therefore you can improve the performance of such network applications.
CTS Protect Enabling this setting will reduce the chance of radio signal collisions between 802.11b
and 802.11g wireless access points. It’s recommended to set this option to ‘Auto’.
TX Power You can set the output power of wireless radio. Unless you’re using this wireless access
point in a really big space, you may not have to set output power to 100%. This will
enhance security (malicious / unknown users in distance will not be able to reach
your wireless access point).
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.