User`s manual

14
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back
to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point
and the changes will take effect after about 30 seconds.
2-4-2-1. Wireless Site Survey
The table will list the access points nearby as the access point is set to Station mode; you can select one of the
access points to associate.
Here are descriptions of every setup item:
Select Click the radio button to select the access point.
Channel Display to channel number of the access point.
SSID Display the SSID name of the access point.
BSSID Display the BSSID (MAC Address) of the access point.
Encryption Display the encryption setting of the access points. If you have selected the access point
with security setting, you have to go to ‘2-7. Wireless Security’ to set the same security
with the access point you want to associate.
Authentication Display the authentication type of the access point.
Signal The signal strength of each access point will be displayed here. The signal strength is
stronger, the connection quality is better.
Mode Display the wireless modes include 11b, 11b/g or 11b/g/n or 11n only of the access points.
Refresh Click this button to refresh the table.
Connection Select an access point and click this button to choose the network. The SSID name of the
access point you have selected will be displayed in the Main SSID in the Basic Setting page.