User`s manual

2-4-2. Station-Infrastructure

In this mode, you can connect the access point to Ethernet device such us TV and Game player to enable the

Ethernet device be a wireless station and join to a wireless network through an access point or AP router.

Here are descriptions of every setup item:

Band Please select the wireless band you wish to use. By selecting different band setting, you’ll

be able to allow or deny the wireless client of a certain band.

• If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the

wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to

this access point.

• If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band

will be able to connect to this access point.

• If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this

access point, select 2.4GHz (B+G+N).

Main ESSID Please input the ESSID (the name used to identify this wireless access point) here. You can

input up to 32 alphanumerical characters.

Site Survey When you use this access point as a wireless station for Ethernet network device to have

wireless capability, you have to associate it with a working access point. Click ‘Select Site

Survey’ button, then a “Wireless Site Survey Table” will pop up. It will list all available

access points near by. You can select one access point in the table and it will join wireless

LAN through this access point. Please go to Section 2-4-2-1 for more information about

the ‘Wireless Site Survey Table’.