User`s manual

After you finish with setting, please click ‘Apply’, and the following message will be displayed:

When you see this message, the settings you made is successfully save. You can click ‘Continue’ button to back

to previous page and continue on other setting items, or click ‘Apply’ button to restart the wireless access point

and the changes will take effect after about 30 seconds.

2-4-1-1. Multiple ESSID

This access point supports four SSIDs. Except the main SSID (It can be configure in Basic Setting page), you can

configure another three of SSIDs here. With different SSIDs, you can separate the wireless networks with

different SSID name, wireless security, WMM, and VLAN settings.

Note:

If you want to configure the wireless security for different SSID, please go to ‘2-7. Wireless Security’ for

more information.

Here are descriptions of every setup item:

No. Except Main SSID, you can configure additional three ESSID here.

Enable Select the box to enable the different additional ESSID.

SSID Please input the SSID name (the name used to identify this wireless access point)

here. You can input up to 32 alphanumerical characters.

Broadcast SSID Decide if the wireless access point will broadcast its own ESSID or not. You can hide

the ESSID of your wireless access point (set the option to ‘Disable’), so only people

those who know the ESSID of your wireless access point can get connected.

WMM WMM (Wi-Fi Multimedia) technology, which can improve the performance of certain

network applications, like audio/video streaming, network telephony (VoIP), and

others. When you enable WMM function, the access point will define the priority of

different kinds of data, to give higher priority to applications which require instant

responding. Therefore you can improve the performance of such network

applications.

VLAN ID (0:Untagged) If your network uses VLANs, you can assign the SSID to a VLAN on your network.

Client devices that associate using the SSID are grouped into this VLAN. The VLAN ID

range is from 1 to 4094. The VLAN ID is 0 by default, it means that disable the VLAN

function for the ESSID.