User`s manual

6-5. Tools - Restore to Factory

This button is to reset all settings to the default values. It means the Router will lose all the settings you have set.

So please Note down the related settings if necessary.

Restore : Click this button to restore to default settings.

Factory Default Settings:

User Name : admin

Password : admin

IP Address : 192.168.0.1

Subnet Mask : 255.255.255.0

Note: After restoring to default settings, please restart the device, then the default settings can go into effect.

6-6. Tools - Reboot

Rebooting the Router makes the settings configured go into effect or to set the Router again if setting failure

happens.

Reboot the router : Click this button to reboot the device.