User`s manual

55
5-14. Advanced - Static Routing
This page is used to configure the Router‟s static routing.
Destination LAN IP : The address of the remote host with which you want to construct a static route.
Subnet Mask : The network portion of the Destination LAN IP.
Gateway : The gateway of the next hop, usually the Router or host‟s IP address.
Notes: 1. The gateway must keep the same segment with the Router‟s LAN IP address.
2. If the destination IP address is one host‟s IP address, the Subnet mask should be 255.255.255.255.
3. If the destination IP address is an IP address range, the subnet mask should match the IP address. For
example, if the IP is 10.0.0.0, subnet mask should be 255.0.0.0; if the IP is 10.1.2.0, subnet mask
should be 255.255.255.0.