User`s manual

54
5-13. Advanced - URL Monitor
This feature is used to record user‟s Internet activity, so in terms of this feature, the administrator can check out
and control what they can do and have done.
Enable URL Monitor : After checking this feature, the Router will record LAN computer‟s URL information,
including the visiting Website, your LAN IP address and the time. The Router can
record up to 500 entries. If the record is more than 500 entries, the counter will clean
all records and restart the URL record again. If the Router is powered off and restarts
the device, the records will be also lost. The default setting is disabled.
Enable Email : To enable this feature, the URL records will be sent to specified e-mail, which can be
solved the problem that the records will be lost when it is over 500 entries.
Receive E-mail Address : Input the received E-mail‟s address here.
SMTP Server Address : Input the SMTP server address here. If you are not clear what your SMTP server‟s
address is, you can find them from Help page of the registered e-mail.
Send Email Address : Input the sending email address here.
User Name : Input the sending e-mail‟s user name.
Email Password : Input the sending e-mail‟s password.
Time Triggering Interval : To set sending e-mail‟s time interval. The time ranges from 30 to 1440 minutes. For
example: if you input 30 here, it means the Router will send a email from “Send Email
Address” to “Receive Email Address” in every 30 minutes. And then the device will
clean all records and start the recording again.
Entry Triggering Interval : To set sending e-mail‟s entry interval. The entry ranges from 100 to 500. For example:
if you input 100 here, it means the Router will send a email from “Send Email Address”
to “Receive Email Address” in every 100 entries. And then the device will clean all
records and start the recording again.