User`s manual

41
4-6. Wireless - Access Control
To secure your wireless LAN, the wireless access control is actually based on the MAC address management to
allow or block the specific clients to access the wireless network.
MAC Address Filter : Enable/disable MAC address filter. Select “Close” to malfunction MAC address;
“disable” to prevent the MAC addresses in the list from accessing the wireless
network; “Allow” to allow the MAC address in the list to access the wireless
network.
MAC Address Management : Input the MAC address to implement the filter policy. Click “Add” to finish the MAC
add operation.
MAC list : Show the added MAC addresses. You can add or delete them.