User`s manual

40
WPS Encrypt Type : The encryption type used by WPS, generally AES/TKIP.
WPS key : The effective key generated by AP automatically.
AP PIN（KEY） : The PIN code used by default.
Reset OOB : When this button is pressed, the WPS client will be idle state, and WPS indicator will be
turned off. AP will not respond the WPS client‟s requests and the set the security mode as
WPA mode.
4-5. Wireless - WDS
WDS (Wireless Distribution System) is used to expand wireless coverage area. This Router provides three modes:
Lazy, Bridge and Repeater.
Lazy : In this mode, the connected device can be Bridge mode or Repeater mode and enter the
Router‟s BSSID to establish the connection.
Bridge : You can wirelessly connect two or more wired networks via this mode. In this mode, you need
to add the Wireless MAC address of the connecting device into the Router's AP MAC address
table or select one from the scanning table.
Repeater Mode : In this mode, add the opposing MAC address into each own AP MAC address table by manual or
scanner to enlarge and extend the wireless radio.
Encrypt Type : Select one from WEP, TKIP, AES for security here.
Pass phrase : Enter the encrypted key for wireless devices.
AP MAC : Input the MAC address of another (opposing) wireless router you want to connect.
NOTE: It is recommended that two wireless routers keep the same bandwidth, channel number, and security
settings. Apply the settings and reboot the Router to activate it.