User`s manual

19
3-2-2. Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not
need to enter the information like other modes. Click “Next” and “Save” to finish the settings.
3-2-3. Static IP
In this screen, fill the network address information from your ISP in the IP Address, Subnet Mask, Gateway and
Primary DNS server fields and click “Next”.
Click “Save” to complete the setup wizard. The Router will record the settings you made. To activate the settings,
it is recommended to select “Reboot the Router” from “System Tool” of the left menu. It is rebooting now, please
wait for a few minutes and DO NOT power off it.