User`s manual

You can secure your Wireless Connection with encryption. By default, the wireless router is secured with

WPA-PSK/WPA2-PSK Mixed Mode encryption. The predefined encryption key can be found on the bottom of the

router.

Note: All security options of the Setup Wizard are explained, but it is advised to secure your network with

“Mixed WPA-PSK/WPA2-PSK” security if your Clients do not support WPS. This is the highest WPA2

security level, with backwards compatibility to WPA only clients.

Note: Remember or write down the entered wireless security information. You will need it when you want to

configure a Wireless Client to connect to the wireless router!

M. Select a security level for your

Wireless Network.

When a security level is chosen, the

Wizard will show fields for the

required information.

N. If you want to secure your network

with WEP encryption, select “WEP”

from the drop-down list. Enter the

WEP key in ASCII format (input: A-Z,

0-9).

Note: Through the Wizard you can

only configure WEP 64Bits.

Security – WEP Encryption

O. If you want to secure your network

with WPA-PSK or WPA2-PSK, select

“WPA-PSK”, “WPA2-PSK” or “Mixed

WPA-PSK/WPA2-PSK” from the

drop-down list.

Enter the Passphrase for your

encryption and confirm the

Passphrase in the second field.

Security – WPA-PSK / WPA2-PSK