User Manual
89
EN
SDV1230
Connection of the terminal box of the appliance
• The hob is already supplied with amains cable. In case it is necessary to replace the mains cable due to damage,
Fig. 9 or Fig. 10, shows the wiring of the terminal box.
• The mains cable must be replaced with the same type of cable with the corresponding wire cross section.
• After connecting the new mains cable to the terminal box, secure the cable from being pulled out from the
terminal box.
• Follow the same procedure as described above when installing the appliance into the worktop cut-out and
connecting it to the mains power.
Connecting the hob by a3-core mains cable (230 V)
Use acable with wires of adiameter of at least 4 mm
2
.
Fig. 9
L N
Brown
Blue
Green-yellow
L-N:220-240V~