User Manual
85
EN
SDV1230
3.  Use the “-” and “+” buttons to set the desired time on the timer display in one-minute steps. To set the time in ten 
minute push again timer setting button (6) and then will flash desired time on the timer display in ten-minutes 
steps. Use the “-” and “+” buttons to set the required tens of minutes.
4.  After the delayed shut down time is set dot in the lower right corner will flash in addition to the selected power 
level of the selected cooking zone.
5.  To cancel the delayed shut down time, on the control panel (6) press the “+” and “-” buttons for setting the timer 
(1) simultaneously. The number “00” will be displayed.
6.  After the set delayed shut down time has elapsed, the “- -” symbol appears on the display and the selected cooking 
zone, for which the delayed shut down was set, will shut down automatically.
Delayed shut down function for multiple cooking zones
To set the delayed shut down for multiple cooking zones, proceed as in setting the delayed shut down of one cooking 
zone.
1.  Press the cooking zone selection button (4) for which you want to use the delayed shut down function.
2.  Press the timer button (6). The display shows the “10” above the buttons and the number „0“ starts flashing starts 
flashing.
3.  Use the “-” and “+” buttons to set the desired time on the timer display in one-minute steps. To set the time in ten 
minute push again timer setting button (6) and then will flash desired time on the timer display in ten-minutes 
steps. Use the “-” and “+” buttons to set the required tens of minutes.
4.  After the delayed shut down time is set dot in the lower right corner will flash in addition to the selected power 
level of the selected cooking zone.
5.  To cancel the delayed shut down time, on the control panel (6) press the “+” and “-” buttons for setting the timer 
(1) simultaneously. The number “00” will be displayed.
6.  After the set delayed shut down time has elapsed, the “- -” symbol appears on the display and the selected cooking 
zone, for which the delayed shut down was set, will shut down automatically.
7.  For the respective cooking zone for which the next delay shut down time is set, adot will flash in the lower right 
corner next to the set power level.
8.  After the set delayed shut down time has elapsed, the “- -” symbol appears on the display and the selected cooking 
zone, for which the delayed shut down was set, will shut down automatically.
Note:
•  If the delayed shut down is only set for one cooking zone, only the cooking zone for which the delayed shut down 
has been set is switched off after the set delay time has elapsed. Other cooking zones will remain on if no delayed 
shut down is set for them.
•  Delayed shut down can be set for amaximum of 99 minutes.










