User Manual

SDV1230

Switching OFF the hob

• By pressing the ON/OFF button (1) you can turn oﬀ the hob. All the settings will be reset.

• After switching oﬀ the hob the “H”, symbol can be displayed, which indicates that some of the used cooking zones

are still hot and there is arisk of serious burns. Never touch these cooking zones!

Note:

• If all the cooking zones will be switched oﬀ and within 1 minute the control panel will not be touched the hob will

switch oﬀ automatically.

• For safety reasons, the automatic switch oﬀ (cooking time) on individual cooking zones is limited to 8 hours (power

level 1–3), 4 hours (power level 4–6) or 2 hours (power level 7–9).

ADVANCED FEATURES

Child lock function

This function prevents unwanted operation of the hob.

1. For locking the control panel press the symbol for activation/deactivation of the child lock (5).

2. The “Lo” (Lock) symbol will be displayed on the control panel, which symbolises that the control panel is locked.

Thus, the control panel of the hob is locked except for the ON/OFF symbol (1), which is deactivated.

3. For unlocking the control panel press and hold the symbol for activation/deactivation of the child lock (5) for 3

seconds.

4. The “Lo” symbol disappears and the control panel is active again.

Note:

• If the hob is switched oﬀ while the child lock function is activated, the control panel lock is active even after the

hob has been switched oﬀ. In this case the child lock is activated when the hob is switched on and the “Lo” symbol

is displayed on the control panel.

• For unlocking the control panel press and hold the symbol for activation/deactivation of the child lock (5) until the

acoustic sound goes oﬀ. The “Lo” symbol disappears and the control panel is active again.

Setting the cooking time (timer function)

This function can be set when the cooking zone has not been selected.

1. Press the timer setting button (6). The timer will show “10” and “0” will ﬂashes.Use the “-” and “+” buttons to set

the desired time on the timer display in one-minute steps. To set the time in ten minute push again timer setting

button (6) and then will ﬂash desired time on the timer display in ten-minutes steps. Use the “-” and “+” buttons to

set the required tens of minutes.

2. To cancel the set cooking time, set the value on the timer “00” with the “-” button. “-” appears on the display.

3. After the set cooking time has elapsed, the “- -” symbol appears on the display and acoustic sounds will be heard

for 30 seconds.

Note:

The minute minder function only works if the hob is in use - ie. it is not necessary to select a speciﬁc cooking zone for

the setting, but it is necessary to cook on some of the cooking zones.

Otherwise, the board will turn oﬀ automatically after 1 minute, so the beep will not sound at the minute. This function

is set on the boards for better energy eﬃciency.

Delayed shut down function of one cooking zone

The delayed shut down function can be used for all the cooking zones of the hob. For each cooking zone, diﬀerent

delay times can be set.

1. Press the cooking zone selection button (4) for which you want to use the delayed shut down function.

2. Press the timer button (6). The display shows the “10” above the buttons and the number „0“ starts ﬂashing starts

ﬂashing.