User manual

Key Buzzer
The VA-KBDPRO+ has an internal key press
buzzer which can be enabled or disabled as
required. Enter the keyboard setup menu and use
the joystick to highlight KEY BUZZER. The cursor
flashes next to ENABLE BEEP
KEY BUZZER:
▓ENABLE BEEP
Twist the joystick left / right to toggle between
ENABLE BEEP / DISABLE BEEP and press
ENTER to confirm
Set Key ID
When multiple keyboards are used on the same
matrix system, each keyboard must have a unique
ID. Enter the keyboard setup menu and use the
joystick to highlight SET KEY ID.
SET KEY ID:
▓01<01-63)
Use the numeric keypad to enter a KEY ID value
and press ENTER to accept
Set Key Level
When multiple keyboards are used on the same
matrix system, keyboards can be assigned a key
level where 01 is the highest and 15 is the lowest.
For example, a matrix operation performed by one
operator cannot be changed by another operator
unless they have a higher key level. Enter the
keyboard setup menu and use the joystick to
highlight SET KEY LEVEL.
SET KEY LEVEL:
▓01<01-15)
Use the numeric keypad to enter a KEY LEVEL
value and press ENTER to accept.
Set monitor range
Enter the keyboard setup menu and use the
joystick to highlight SET MON RANGE.
SET MON RANGE:
>▓00-239<000-239
Use the numeric keyboard to enter first and last
values according to the number of monitors
connected to the system, eg 001-009
Set camera range
Enter the keyboard setup menu and use the
joystick to highlight SET CAM RANGE.
SET CAM RANGE:
>▓00-254<000-254
Use the numeric keyboard to enter first and last
values according to the number of cameras
connected to the system, eg 001-072
Set DVR range
Enter the keyboard setup menu and use the
joystick to highlight SET DVR RANGE.
SET DVR RANGE:
>▓00-254<000-254
Use the numeric keyboard to enter first and last
values according to the number of monitors
connected to the system, eg 001-006
Change default password
The VA-KBDPRO+ default password can be
changed to prevent unauthorised access. Enter
the keyboard setup menu and use the joystick to
highlight CHANGE PASSWORD.
CHANGE PASSWORD:
>▓876543210
Use the numeric keypad to enter a new 10 digit
password and press ENTER to confirm
Reset factory defaults
Enter the keyboard setup menu and use the
joystick to highlight RESET DEFAULT_I?
RESET DEFAULT_I?:
>▓*********
Use the numeric keypad to enter the factory reset
password of 0123456789 and press ENTER
5