User manual

Camera setup
SET PROTOCOL
Enter the keyboard setup menu and use the
joystick to highlight SET CAMERA. The cursor
flashes next to SET_PROTOCOL
SET CAMERA:
>SET_PROTOCOL>
Press ENTER to display the SET PROTOCOL
screen
ALL :>VC
0001:>VC
Protocols can be set globally or for each individual
channel.
To set protocol globally, move the joystick
up/down so that the cursor flashes on the ‘>’
symbol next to ALL :
ALL :▓VC
0001:>VC
Twist the joystick left / right to select the required
protocol and press ENTER to confirm. Press ESC
to return to the SET CAMERA menu
To set protocol for each individual channel, move
the joystick up/down so that the cursor flashes on
the ‘0’ of 0001:
ALL :>VC
▓001:>VC
Use the numeric keypad to enter the 4 digit
camera ID to change, eg ‘0002’. The cursor now
moves to protocol selection
ALL :>VC
0002:▓VC
Twist the joystick left / right to select the required
protocol and press ENTER to confirm. The ID
automatically advances to the next number.
Continue setting up protocols for all camera IDs
as required and then press ESC to return to the
SET CAMERA menu
Camera setup
SET BAUDRATE
Enter the keyboard setup menu and use the
joystick to highlight SET CAMERA. The cursor
flashes next to SET_PROTOCOL. Twist the
joystick right to change the display to
SET_BAUDRATE
SET CAMERA:
>SET_BAUDRATE>
Press ENTER to display the SET BAUDRATE
screen
ALL :>9600
0001:>9600
Baudrates can be set globally or for each individual
channel.
To set baudrate globally, move the joystick
up/down so that the cursor flashes on the ‘>’
symbol next to ALL :
ALL :▓9600
0001:>9600
Twist the joystick left / right to select the required
baudrate and press ENTER to confirm. Press ESC
to return to the SET CAMERA menu
To set baudrate for each individual channel, move
the joystick up/down so that the cursor flashes on
the ‘0’ of 0001:
ALL :>9600
▓001:>9600
Use the numeric keypad to enter the 4 digit
camera ID to change, eg ‘0002’. The cursor now
moves to baudrate selection
ALL :>9600
0002:▓9600
Twist the joystick left / right to select the required
baudrate and press ENTER to confirm. The ID
automatically advances to the next number.
Continue setting up baudrates for all camera IDs
as required and then press ESC to return to the
SET CAMERA menu
4