User manual


''!&'%'
The VXH264 startup screen detects and checks the status of hard drives and the
CDRW / DVR-RW drive
After startup diagnostics are complete, the operator must log-on to the system. The
default user name is ‘ADMIN’. Using the !!&'"! buttons, key in
the default password of ‘1234’ and press the !'% button
The VXH264 begins normal operation and shows the default display of all 4 channels.
The statu
s bar at the bottom of the screen shows current time and date. T
he status
bar includes Menu, Archive, Search, Display, PTZ & Zoom control along with the
‘Log’.
A title for each channel is shown
The red square and letter ‘C’ in the top right of each channel display shows that the
channel is recording in Timer / Schedule mode.
If audio recording is enabled, an audio icon showing 1,2,3 or 4 is displayed.
CONNECT AND SWITCH ON
• Connect up to 4 CAMERA INPUTS. The VXH264 also has LOOP OUTPUTS so that any signals
can be fed to other equipment if required. Termination is automatically set by the VXH264 depending on
connection type
• Connect one or more monitors to the VXH264 using the COMPOSITE, OR DVI connections
• Connect power to the VXH264. The VXH264 checks for proper power connection and emits a beep. Press the
POWER BUTTON on the front panel of the VXH264 to begin operation.