User manual
(&!'% "'!'
After successful connection, the remote client displays the current live view from the VXH264.
For each channel, the title, time / date and resolution are displayed.
LIVE DISPLAY MODES
Use the &#, buttons to switch from a single or quad display.
To sequence, select the screen you require (single or multi mode) and click the &$(!
button. Click &$(! again to to move to the next camera.
The !(&*'button shifts the positions of all channels by one place. For example,
the following displays shows a 4 channel VXH264 in quad screen mode.
Clicking !(&*'has moved all channels back by one position.
By clicking the (&%! button, the live display is shown in full screen without any of the
remote client controls.
To return to normal viewing, press the ESC key or double click the right mouse click on any part
of the screen.
To quickly select a particular channel, use the DISPLAY CHANNEL drop down box and click the
channel you want to view.
AUDIO MONITORING AUDIO TALKBACK
During a remote client session, the operator can
monitor audio connected to the VXH264.
Click the (" button to toggle live audio on or off.
During a remote client session, the operator can
‘talkback’ to the VXH264. During talkback, audio is
routed through the (""(' connector on the
rear of the VXH264.
To talkback, click and hold the ' button
and speak normally in to the microphone.
&D8C01;4B?40:4AB<DBC142>==42C43C>C74
#5>A0D38><>=8C>A8=6C>5D=2C8>=