User manual


%"%!
RESOLUTION: Recording resolutions of CIF (352x288), 2 CIF(704x288) or D1 (704x576) can
be selected for each channel.
FPS: Frame rates between 1 and 25 can be set for each channel.
QUALITY: Five different picture recording qualities can be set for each channel.
AUDIO: If audio devices are connected to the VXH264 then you can select them to be ON or
OFF.
During playback, when a particular channel is selected in full screen, the assigned audio
c
hannel will be played back at the same time.
Adjust values as desired and select OK to finish and return to the parameter menu. Other time
periods can be configured in the same manner.
%4<4<14A C70C 85 &(
"8BB4CC>*,A42>A38=6
B4CC8=6B =443 C> 14 270=643 5>A
4027 30H 0B F4;; 0B 5>A 4027
?0AC82D;0AC8<4
'74 3450D;C B4CC8=6B 5>A 0;;
270==4;B8BG#&
&'@D0;8CH
!>C4'74)+BD??>ACB0<0G8<D<A42>A38=6A0C402A>BB0;;270==4;B>5
5A0<4B?4AB42>=30CGA4B>;DC8>=BB4CC8=6B0A4039DBC43C74
M5A0<4B0E08;01;4N 0C1>CC><A867C 38B?;0HBC74=D<14A >5 0E08;01;4 5A0<4B BC8;;
A4<08=8=60=3<DBC0;F0HB14I4A>>A78674A
5 F78;BC270=68=6A42>A38=6B4CC8=6BC78B586DA4142><4B=460C8E4A42>A38=6
A4B>;DC8>=B0=3>A5A0<4A0C4B<DBC14;>F4A43C
>8=2A40B4C74M5A0<4B0E08;01;4N
E0;D4C>I4A>>A01>E4
SCHEDULE
To change SCHEDULE settings, highlight CONTINUOUS/MOTION RECORDING and press
!'%. Use the (%&"%,&to highlight SCHEDULE and press !'%.
The schedule box is highlighted in blue.
Press !'% to display the yellow cursor.
Example: To set all channels to motion detection recording only between 18:00 and 00:00.
Use the (%&"%,& to move the orange cursor to the 18:00 position and press !'%.
This becomes the starting position.
Use the (%&"%,& to stretch the orange cursor across and down to select all channels
between 18:00 and 00:00.