User manual
DISK MANAGE
To manage the internal hard drives, highlight DISK MANAGE and press !'%.
RECORD TIME LIMIT: In certain circumstances, it may be necessary to limit the amount of footage stored
on the VXH264 (to comply with data protection laws for example).
Recording can be limited to 12 hours, 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 1 week, 2 weeks, 3
weeks 1 month or 2 month. Once the VXH264 has this amount o
f footage stored, it will start to overwrite
the earliest recorded footage.
OVERWRITE: When set to ON, the VXH264 will start overwriting the earliest recorded footage once the
hard drive becomes full or record limit time is reached. When set to OFF, the VXH264 will stop recording
when the disk becomes full. The status bar will show the percentage of the HDD that is full.
FORMAT: If necessary, all footage can be erased from the VXH264 using this option.
#;40B4=>C4*74=")%*%'>?C8>=
8BB4CC>"C74A42>A38=6C8<4;8<8C20=
=>C14B4C
To set-up the recording behaviour of the VXH264, highlight RECORD MENU and press !'%.
SCHEDULE MODE: Either DAILY (one schedule will apply to every day of the week) or WEEKLY (each
day of the week has its own schedule).
PRE EVENT RECORDING TIME: When the VXH264 is not in continuous recording mode, this setting
determines the amount of footage that is always recorded before an event occurs (motion detection, alarm
input etc.)
POST EVENT RECORDING TIME: When the VXH264 is not in continuous r
ecording mode, this setting
determines the amount of footage that is always recorded after an event occurs (motion detection, alarm
input etc.)
PANIC RECORDING: Can be set to MANUAL (panic recording continues indefinitely after it has been
triggered until the #! button is pressed again), AUTO (when the #!button is pressed, the unit only
records in panic mode for the time specified in PANIC REC
ORDING TIME) or DISABLE (panic recording
is disabled).
PANIC RECORDING TIME: When PANIC RECORDING is set to AUTO itdetermines the amount of time
the VXH264 records in panic mode before reverting back to standard recording mode.
INTENSIVE RECORDING MODE: When set to OFF, the VXH264 records as normal according to the
CONTINUOUS / MOTION SETUP schedule. When set to ON, the VXH264 records according to the
C
ONTINUOUS / MOTION SETUP schedule, but will automatically increase the recording frame rate or
r
esolution to the highest amount possible on any channel that has motion detection.
RECORDING PRIORITY: When INTENSIVE RECORDING MODE is set to ON it determines whether the
frame rate (FPS) or resolution (SIZE) is increased to the highest amount possible during motion detection.
RECORD MENU
RECORDING OPERATIONS
%"%!
& ! !'