User manual


"!(%!')+
&#,
To set-up the various display options, highlight DISPLAY and press !'%
STATUS BAR: Turns the status bar at the bottom of the live display ALWAYS ON or auto off delay
time.
CAMERA TITLE: Determines whether the camera title is displayed.
RECORDING MODE ICON: Determines whether the VXH264 recording status is shown at the
top right of each channel display window.
BORDER: Determines whether there is a border around each channel in multi screen display
m
ode.
BORDER COLOUR: If the border is ON, the operator can choose the colour.
LANGUAGE: Select the language of display.
To change any of these settings, highlight OSD and press !'% to select. Use the (%&"%
,& to navigate to the option required. Press !'% to select the option (the cursor changes
to yellow) and use the (%&"%,& to change the setting. Press 
!'% to save the setting
or %'(%! to cancel.
DISPLAY: OSD
DISPLAY: MONITOR
SEQUENCE DWELL: The time that each screen is displayed in a sequence operation.
SPOT SEQUENCE DWELL: The time that each screen is displayed on the spot monitor outputs.
DE-INTERLACE MODE: When recording any channels in D1 resolution (704 x 576) this should
be set to ON to prevent judder during playback.
ALARM POP-UP MODE: When set to ON, an alarm input will cause the associated channel to
display full screen.
A
LARM POP-UP DWELL: Determines how long the full screen popup is displayed after an alarm
input. If the alarm condition continues, the popup screen is displayed constantly .
MOTION POP-UP MODE: When set to ON, motion detection will cause the associated channel
to display full screen.
MOTION POP-UP DWELL: Determines how long the full screen pop-up is displayed after motion
detection. If motion continues, the popup screen is displayed constantly .
To change any of these settings, highlight MONITOR and press !'% to select. Use the
(%&"%,& to navigate to the option required. Press !'% to select the option (the cursor
changes to yellow) and use the (%&"%,& to change the setting. Press !'% to save the
setting or %'(%! to cancel.