User manual


"!(%!')+
 %
To select or deselect specific areas, press !'% to bring up the yellow cursor square in the
top left of the display.
Move the cursor using the (%&"%,& to the first corner of the area to be set and press
!'% – The grid square retains the yellow cursor square.
CAMERA: MOTION SENSOR
SENSITIVITY: Between 1 (Lowest) and 10 (Highest) determines the degree of motion required
before recording is activated.
AREA SETUP: Choosing this option allows the operator to define which areas of the image are
monitored for motion detection.
Black grid squares represent detection areas, blank areas are ignored. The default is that motion
will be detected across the entire image.
To quickly select or deselect the entire grid, press %'(%! to bring up the motion menu.
Highlight SELECT ALL or DESELECT ALL as appropriate and press !'%
AREA SETUP