User manual


"!(%!')&#,
"! 
3 different display modes are supported by the 4 channel VXH264.
By repeatedly pressing the &#, button, the operator can choose between single, quad
screen and basic sequence
All the display modes are static with the exception of the sequence mode. In this mode, the
sequence symbol ( ) is displayed and each channel is shown in full screen for a set period
of time (default 5 seconds) before switching to the next channel. The sequence runs
i
ndefinitely until a different display mode is chosen.
To view a particular channel in full screen, press the corresponding !!
&'"!button.
Pressing the same !!&'"! button again will switch the display back to
the last selected multi screen mode.
If audio recording is enabled for a selected channel, the chosen audio source is
aut
omatically played when that channel is viewed in full screen.
 