User manual
,'(%&
" !"
The VXH264 menu structure and on-screen display is presented in a simple to use and logical GUI format.
Any operation performed on the VXH264 will not affect the recording including local playback, local set-up, multi-user remote
viewing and playback, remote setup and archiving.
!$$&"
4 audio inputs are supported which can be assigned to
any video channel. Live and re
corded audio can be monitored
remotely over the internet and remote audio transmission for PA broadcast on-site is supported. The viewer can hear the
audio from the camera they are viewing on full-screen.
!!
Web connection is provided using a standard browser e.g. connection for up to 4 VXH264 units in one session. Depending
on the user level, full control
of the VXH264 is available over the intern
et as well as the ability to remotely configure the
VXH264.
The VXH264 allows remote log-on users to see the current status of the recorder by showing:
“C” continuous, “M” Motion, “A” Alarm, “R” Relay out.
#
Recorded footage (including audio) can be archived to a USB memory stick, CD or DVD. Playback software is embedded
with the back-up files and the back-up also contains the system event log and back-up log for full traceability.
Save your
setup to USB to make future installations even more simple and time efficient.
# !"
Recording can be scheduled, alarm activated or motion activated. For each type of recording, frame rates, image quality and
audio recording properties can be adjusted, per hour, per day and for each indivi
dual channel. The VXH264 also has a panic
re
cording feature (from the front panel or external input) which overrides all other recording settings to provide the best quality
recording in the event of an emergency.
!!&!
Full telemetry control is available from the front panel or remote connection with a wide number of speed dome protocols
supported. Protocols can be set individually for ea
ch channel and telemetry speed can be adjusted to suit particular speed
d
omesThe telemetry will allow more than one camera to go to a preset from an alarm activation.
%! #! "!
The VXH264 has 4 main monitor outputs (Composite, VGA, S-Video and HDMI) which can be used simultaneously. The
VXH264 is provided with 4 spot monitor outputs. Each spot monitor output can be programmed in t
he VXH264 set-up.
# &
The VXH264 displays single or multi-screen images and has several sequence modes (standard and user definable).
"!"
All configuration settings on the VXH264 can be saved to USB memory stick or a PC file remotely. The saved data can then
be uploaded to other VXH264 units allowing rapid deployment where more than one VXH264 is being installed.
"
!
The VXH264 can send emails to specific users to notify events such as alarm activation, motion detection, hard drive failure.
"!!
The Jog / Shuttle wheel provides precise playback control on the VXH264 and allows 1x - 64x playback speeds in forward or
reverse play and frame by frame advance.
!"
The IP address of any remote log-on activity can be shown as part o
f the activity log.
&!"