Installation Guide

36 Inch Bar Racks
Models PR-40200, PR-40215,
PR-40219 and PR-49200
Page 1
Concept Housewares, A Division of PR Housewares, LLC
www.prhousewares.com Email: [e-mail]
Photo A - Fully Assembled
Photo B - Mounting Brackets
Photo C - Package of Screws.
Quantity may vary based on
product ordered.
Assembly:
To install, you will need the following:
- Pencil and tape measure
- Philips screwdriver if needed and pliers
- Electric drill with assorted bits.
Parts:
- Main unit (See Photo – A)
- Mounting brackets already attached (See Photo – B)
- Package of ceiling hooks (See Photo – C)
- Ceiling links PR-41202, pan hooks PR-41207 and
swivel pan hooks PR-41213
Please consult with your local hardware store if you have
any questions or concerns about the construction of your
walls or ceilings. ey can assist you in selecting the proper
hardware and procedures. e generic hardware provided
will work for most applications. Always measure twice
before drilling. NOTE: If you have any doubt about your
installation or your ceilings ability to oer the proper
support for your pot rack, please contact a professional.
Mounting Directions:
Determine where ceiling joist (beams, studs) are located.
Place ceiling hooks so that the hanging links will hang
straight down from the ceiling. It is important the ceiling
hooks are secure within the joists so they will bear the
weight of the rack and any cookware. Proper installation
diagram (See Photo – D)
Additional links and hooks available.
See www.prhousewares.com for a list of parts and e-tailers.