Product Manual

Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20181228
Page 9 of 11
LA Controller
DIP Switch Settings:
After changing DIP switch settings, you must cycle the power to the LA-Controller for the
change to take effect.
DIP Switch #1  OFF (switch position  up)
DIP Switch #2  OFF (switch position  up)
With power applied to the LA-Controller – without power applied to the YELLOW ignition wire:
• All buttons on the wired 3-button switch function normally.
• All 3 wires for the optional push button input switches function normally.
With power applied to the YELLOW ignition wire:
• The wired 3-button switch does not work.
• The 3 wires for the optional push button input switches do not work.
DIP Switch #1  ON (switch position  down)
DIP Switch #2  OFF (switch position  up)
With power applied to the LA-Controller – without power applied to the YELLOW ignition wire:
• The wired 3-button switch does not work.
• The 3 wires for the optional push button input switches do not work.
With power applied to the YELLOW ignition wire:
• All buttons on the wired 3-button switch function normally.
• All 3 wires for the optional push button input switches function normally.
• The LED above a Preset button stays ON when using a Preset button or the optional
input wire for that Preset.