Product Manual

Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20181228
Page 4 of 11
LA Controller
The white, green, and blue wires cannot be used to program preset positions user
must use the wired 3-button switch to program preset positions.
The white, green, and blue wires cannot be used in pairs (white & green -or- green &
blue) to extend or retract the actuator user must use the wired 3-button switch to
extend or retract the actuator.
Proper wiring is critical to the correct operation of this unit. Inspect all wiring to be
certain of proper connections, good quality ground, and proper fusing. Also check
wire routing, keeping wires away from potential damage such as moving parts.
Dimension Diagram: