Product Manual B

Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20161111
Page 9 of 10
LA Controller
DIP Switch Settings:
After changing DIP switch settings, you must cycle the power to the LA-Controller for the
change to take effect.
DIP Switch #1  OFF (switch position  up)
DIP Switch #2  OFF (switch position  up)
With power applied to the LA-Controller – with or without power applied to the YELLOW
ignition wire:
 All buttons on the wired 3-button switch function normally.
 All 3 wires for the optional push button input switches function normally.
DIP Switch #1  ON (switch position  down)
DIP Switch #2  OFF (switch position  up)
With power applied to the LA-Controller – without power applied to the YELLOW ignition wire:
 The wired 3-button switch does not work.
 The 3 wires for the optional push button input switches do not work.
With power applied to the YELLOW ignition wire:
 All buttons on the wired 3-button switch function normally.
 All 3 wires for the optional push button input switches function normally.
DIP Switch #1  OFF (switch position  up)
DIP Switch #2  ON (switch position  down)
When power is first applied to the LA-Controller – without power applied to the YELLOW
ignition wire:
 Actuator extension stays where it is at power up.
 The wired 3-button switch functions normally.
 All 3 wires for the optional push button input switches function normally.
With power applied to the YELLOW ignition wire:
 Actuator extension moves to preset #2.
 The wired 3-button switch does not work.
 The 3 wires for the optional push button input switches do not work.
Power removed from the YELLOW ignition wire:
 Actuator extension moves to preset #1.
 All buttons on the wired 3-button switch function normally.
 All 3 wires for the optional push button input switches function normally.
Until power to the LA-Controller is removed, the actuator continues to cycle between preset
#2 and preset #1 as the YELLOW ignition wire is powered and power is removed from the
ignition wire.