Product Manual B

Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20161111
Page 10 of 10
LA Controller
DIP Switch #1  ON (switch position  down)
DIP Switch #2  ON (switch position  down)
When power is first applied to the LA-Controller – without power applied to the YELLOW
ignition wire:
 Actuator extension stays where it is at power up.
 The wired 3-button switch does not work.
 The 3 wires for the optional push button input switches do not work.
With power applied to the YELLOW ignition wire:
 Actuator extension moves to preset #2.
 All buttons on the wired 3-button switch function normally.
 All 3 wires for the optional push button input switches function normally.
Power removed from the YELLOW ignition wire:
 Actuator extension moves to preset #1.
 The wired 3-button switch does not work.
 The 3 wires for the optional push button input switches do not work.
Until power to the LA-Controller is removed, the actuator continues to cycle between preset
#2 and preset #1 as the YELLOW ignition wire is powered and power is removed from the
ignition wire.
Ordering Key:
Part Number Description
LA-CONTROLLER Controller 3-Position
Terms of Use
The user is responsible for determining the suitability of Concentric International products for specific
applications. Due to continuous development in order to improve its products, Concentric International
products are subject to change without prior notice. Concentric International reserves the right to discontinue
the sale of any products at any time.